Fabrication of 550 nm gratings in fused silica by laser induced backside wet etching technique

A series of 550 nm spacing gratings were fabricated in fused silica by laser induced backside wet etching (LIBWE) method using the fourth harmonic of a Q-switched Nd:YAG laser (wavelength: l = 266 nm; pulse duration: FWHM = 10 ns). During these experiments we used a traditional two-beam interference method: the spatially filtered laser beam was split into two parts, which were interfered at a certain incident angle (2u = 288) on the backside surface of the fused silica plate contacting with the liquid absorber (saturated solution of naphthalene-methylmethacrylate c = 1.85 mol/dm3). We studied the dependence of the quality and the modulation depth of the prepared gratings on the applied laser fluence and the number of laser pulses. The surface of the etched gratings was characterized by atomic force microscope (AFM). The maximum modulation depth was found to be 180–200 nm. Our results proved that the LIBWE procedure is suitable for production of submicrometer sized structures in transparent materials