Falling film evaporation heat transfer of water/salt mixtures from roll-worked enhanced tubes and tube bundle

An experimental study is carried out for enhancement of falling film evaporation heat transfer of pure water and water/salt mixtures on horizontal smooth tube and two kinds of structured tube bundles under atmospheric pressure. The experimental results show that the low-cost roll-worked tube can greatly enhance the evaporation heat transfer performance of the falling film, and make it comparable to that of expensive commercial enhanced tubes such as GEWA-T tubes, TE tubes and HF tubes, even at low and moderate heat flux levels. The average evaporation heat transfer coefficients for the roll-worked tube bundle are basically independent from the parameters tested such as flow and heating conditions, salt-concentrations, as well as geometries of the tube bundles. The present experimental data result in a constant heat transfer coefficient; α≈20 kW/m2 K, in the convective heat transfer range of the heat fluxes <105 W/m2.