Polymer-layered silicate nanocomposites based on poly(ε-caprolactone)

Poly(ε-caprolactone) nanocomposites based on montmorillonite modified with hexadecyltrimethylammonium bromide (M-HTAB) were prepared by the in situ polymerization technique. As a result, nano-structured PCL/M-HTAB systems were obtained. It was found that the molecular weight of PCL decreased with an increase in silicate content in the system. Within the investigated range of molecular weight, crystallization behavior of poly(ε-caprolactone) was affected only by the presence of M-HTAB. A silicate loading of higher than 10 wt.% reduced both crystallinity degree and the crystallization rate of PCL. The structure of obtained intercalated nanocomposites depended on the amount of montmorillonite in the systems. The periodicity of clay layers, estimated by X-ray diffraction, was found to be high at increased silicate loading in the nanocomposite. Since PCL and SAN are miscible, an attempt was made to use PCL/M-HTAB systems as a modifier for SAN matrix. Apparently, a quantity as small as 0.66 wt.% of M-HTAB in such blends induced a clear increase in material stiffness. An increase of Youngʹs modulus of more than 40% in comparison to neat SAN was observed at 5.65 wt.% silicate loading.