An investigation into the influence of inter-aggregate spacing and the extent of the ITZ on properties of Portland cement concretes

Conventionally-designed concretes were prepared with different sand particle size distributions, so as to systematically vary the extent of aggregate-cement paste interface and the mean spacing between sand grains. The range of fineness modulus of the sands fully encompassed the range of sands normally used in concretes. The concretes were batched at w/c ratios of 0.30 and 0.50 and cured for various periods before carrying out determinations of mechanical properties and of “rapid chloride permeability”. The conventional notions of the effect of the ITZ on concrete properties would predict that a reduction in strength and an increase in chloride permeability would accompany increased ITZ interfacial area and closer spacing between sand grains. In general, no such influence was found. It appears from this research that the traditional notions of the adverse influence of the ITZ on the properties of conventional concretes may not be accurate, within the realms of conventional concrete and typical inter-aggregate spacings.