Fabrication of biomorphic SiC composites using wood preforms with different structures

Biomorphic SiC composites were fabricated from wood, including high-density compressed cedar, high-density fiberboard (HDF) and low-density paulownia followed by the fabrication of a preform and liquid silicon infiltration (LSI) process. The degree of molten silicon infiltration was strongly dependent on the cell wall thickness and pore size of the carbon preform. The mechanical properties of the biomorphic SiC composites were characterized by compressive tests at room temperature, 1000 °C and 1200 °C, and the relationship between the mechanical properties and the microstructural characteristics was analyzed. The compressive strength of the biomorphic composites was found to be strongly dependent on their bulk density and decreased as the test temperature increased to 1200 °C. Strength reduction in the biomorphic SiC composites occurred due to the deformation of the remaining Si at elevated temperatures under ambient atmospheric conditions.