Air separation using a catalytically modified mixed conducting ceramic hollow fibre membrane module

A membrane reactor module consisting of four gas-tight hollow fibre membranes made of the mixed ionic-electronic conducting perovskite La0.6Sr0.4Co0.2Fe0.8O3 − δ has been tested for oxygen permeation in the temperature range of 650–1000 °C with air on one side and helium on the other. The module was operated under gradientless gas-phase conditions and in the absence of mass transfer limitations at lower temperatures. Also at lower temperature the rate-determining step for oxygen permeation was found to be oxygen reduction with the oxygen permeation performance of the module being significantly enhanced by deposition of a porous platinum catalyst film onto the air-side of the membranes. A stable but mass transfer limited flux of 0.56 μmol cm−2 s−1 (0.73 ml STP cm−2 min−1) was achieved after a period of 4 days of operation at 1000 °C and continued at this rate for a further 4 days. A non-mass transfer limited flux of ca 0.14 μmol cm−2 s−1 was obtained at 800 °C. The membrane module was operated for 500 h before the onset of significant leakage. Post operation qualitative analysis indicated localised changes in the stoichiometry of the membranes with no discernable trend, quantitative analysis on the other hand revealed that the perovskite had retained its starting composition.