High-pressure hydriding of Zircaloy cladding by the thermogravimetry and tube-burst techniques

Hydriding kinetics of modified Zircaloy claddings was studied by the thermogravimetric method at 400 °C and the tube-burst technique at 315 °C. Some specimens were prefilmed with a thin oxide layer by air oxidation on both the inner and outer surfaces which were either pickled or blasted. In the thermogravimetric test, the hydriding rates of bare cladding specimens (no oxide prefilm) were in the range 0.9–1.6 mg/cm2 h with little effect of the surface treatment. Incubation times were less than 1 h or even zero. In the tube-burst test, immediate and extensive hydrogen uptake was observed for these non-coated specimens. On the other hand, the cladding specimens with oxide prefilm exhibited lower hydriding rates ranging from 0.01 to 0.05 mg/cm2 h and incubation times increased to 42 h. In addition, no hydrogen uptake was observed for all oxide-coated specimens for 100–750 h.