VIBRATION POWER TRANSMISSION OVER A RECTANGULAR AREA OF AN INFINITE PLATE SUBJECT TO UNIFORM CONPHASE VELOCITY EXCITATION

In the study of vibration isolation, mobility is normally used to reflect the characteristics of power transmission over the contact region between the exciting machine and its supporting structure. However, recent investigations indicated that power transmission is influenced by the dimensions and shape of the contact region and the use of classical point mobility can lead to significant errors. The surface mobility of an infinite plate over a rectangular contact region subject to a uniform conphase velocity excitation has been derived using the effective point mobility concept for various aspect ratios of the contact region. Results show that power transmission is distributed in a ring-like manner, with the transmission in the central region and along the edges of the contact area being rather small. As the width-based Helmholtz number kw/2 increases, the ring-like region expands outward but less power is transmitted. The surface mobility decreases rapidly as Helmholtz number increases. For the same Helomholtz number, the surface mobility decreases as the aspect ratio of the contact region increases and for the same contact area, it is virtually independent of the shape of the contact region for aspect ratio less than 2 or at large Helmholtz numbers (greater than 4). Experimental measurements of a simulated infinite plate confirm the theoretical calculations. Unlike uniform conphase force excitation, the surface mobility due to uniform conphase velocity distribution does not oscillate with Helmholtz number.