Effect of stabilizer on structural, optical and electrochemical properties of sol–gel derived spin coated TiO2 films

Thin films of TiO2 were prepared using two different sol–gel routes. The two routes employed diethanolamine (DEA) and acetylacetone as stabilizing agents with titanium isopropoxide (Ti(OPri)4) in ethanol as the deposition solution. The densification at 500 °C achieved the nanophase TiO2 films, which were investigated by performing structural, optical and electrochemical studies. Ion storage capacity and transmission measurements showed superior response of the films derived from DEA. Between the films obtained from the two routes, the appearance of the rutile phase at lower temperature for the film synthesized using DEA was predicted on the basis of the thermal analysis of the corresponding xerogel. The nanocrystalline nature of the films was evident from the X-ray diffraction, atomic force microscopy, and scanning electron microscopy. The films deposited from both the stabilizers exhibited electrochromism in 1 M LiClO4-propylene carbonate electrolyte on cathodic polarization.