Separation of phosphatidylcholine and phosphatidylethanolamine by using high-performance displacement chromatography

A binary mixture of phosphatidylcholine (PC) and phosphatidylethanolamine (PE) was successfully separated by high-performance displacement chromatography (HPDC) on an 150 mm×4.6 mm analytical silica column (3–5 μm packing), using dichloromethane–methanol (9:1, v/v) as carrier and ethanolamine as displacer. The effects of displacer concentration, flow-rate, loading amount and the composition of the sample on separation efficiency were studied. Eighty-four milligrams sample (PE:PC 1:1.16) was separated perfectly by using 83 mM ethanolamine (in carrier) as displacer at the flow-rate of 0.1 ml/min. The yields of the pure PE and PC (100% purity) were 94.8% and 87.9%, respectively and the cycle time for a single separation was about 195 min. It was valuable that the optimum loading amount (the allowed maximum of sample loading) was investigated only by using the sample to be simulated the composition of the separated actual one, because the separation efficiency was significantly affected by the composition of the sample. For the same loading amount of 175 mg, the yields of the pure PE and PC were improved greatly from 31.4 and 16.9 to 56.0 and 77.6%, respectively, when the proportion of PE to PC was adjusted from 1:1.16 to 1:4. Furthermore, the separation of PE and PC in an actual sample (soybean phospholipids) was achieved using the proposed HPDC method.