Interaction between dry starch and plasticisers glycerol or ethylene glycol, measured by differential scanning calorimetry and solid state NMR spectroscopy

The interaction of crystalline amylose and of crystalline and amorphous amylopectin with the plasticisers glycerol or ethylene glycol in the absence of water was studied, by using differential scanning calorimetry (DSC) and solid state nuclear magnetic resonance (NMR) spectroscopy. Upon heating starch freshly mixed with plasticisers, a strong exothermal interaction enthalpy of ΔH∼−35 J/g was detected by DSC. At room temperature glycerol interacts mainly with the amorphous starch regions, the interaction taking 8 days to reach equilibrium. For ethylene glycol the interaction is faster, taking four days to reach equilibrium, and the rate is not affected by crystallinity. Ethylene glycol interacts in a more ordered manner with amorphous than with crystalline material, resulting in a narrower ethylene glycol cross-polarisation magic angle spinning (CP/MAS) signal when equilibrium is reached at room temperature. Upon heating, more glycerol or ethylene glycol is immobilised, but in a less ordered manner than upon storage at room temperature. This results in a more intense, but broader plasticiser CP/MAS signal upon heating. Interaction in a more ordered manner probably implies interaction with more of the hydroxy groups of the plasticiser. The polysaccharide mobility is increased more when the plasticiser interacts in a more ordered manner, as observed by small starch signals in HP/DEC spectra.