An improved estimation of size distribution from particle profile measurements

Several methods are available to measure particle size. The majority of them, such as sieving, are off-stream techniques where samples must first be separated from the main stream for analysis. ore, the search for on-line particle size analysis systems has provided the impetus for the introduction of image-based particle size analysers to the mineral industry in the past three decades. Generally, the estimation of particle size distribution on the basis of image analysis depends on measuring a single parameter of particle profile. For example the equivalent area diameter (dA) or mean Feretʹs diameter (dF) distributions, then transforming this data to the equivalent size distribution. However, due to the irregularity of particles being analysed, it is believed that this kind of analysis may increase the error in estimation of particle size distribution since profiles of irregular particles carry more information than can be represented by a single parameter. s paper, a proposed technique which measures two parameters, equivalent area diameter (dA) and mean Feretʹs diameter (dF), for each particle profile has been developed. The accuracy of the technique has then been investigated in the laboratory by successfully estimating (unfolding) the size distribution, where size refers to sieve size, of three samples of different particle shapes with known size distribution.