Super polyolefin blends achieved via dynamic packing injection molding: the morphology and mechanical properties of HDPE/EVA blends

As a part of long-term project aimed at super polyolefin blends, in this work, we report the mechanical reinforcement and phase morphology of the blends of high-density polyethylene (HDPE) and ethylene vinyl acetate (EVA) achieved by dynamic packing injection molding. The shear stress (achieved by dynamic packing injection molding) and interfacial interaction (obtained by using EVA with different VA content) have a great effect on phase morphology and thus mechanical properties. The super HDPE/EVA blends having high modulus (1.9–2.2 GPa), high tensile strength (100–120 MPa) and high impact strength (six times as that of pure HDPE) have been prepared by controlling the phase separation, molecular orientation and crystal morphology of the blends. The phase inversion was also found to shift towards lower EVA content under shear stress. The enhancement of tensile strength and modulus originates from the formation of oriented layer, while the high impact strength is related to shear induced phase morphology. DSC studies indicated that the shish kebab crystal structure that also contributes to the enhancement of tensile strength is formed in the oriented layer. The dramatic improvement of impact strength may result from the formation of microfibers and elongated EVA particles along the flow direction. Wuʹs toughening theory was found non-applicable for the elongated and oriented rubber particles, and a brittle–ductile–brittle transition was observed with increasing EVA content.