Simultaneous measurement of structural and hydrodynamic forces between colloidal surfaces in complex fluids

An AFM study was performed to measure the effect of approach/retraction speed on the interaction force between a colloidal particle and a flat substrate in aqueous solutions containing silica nanospheres at concentrations of 4.5 and 6.5 vol.%. The total force consisted of contributions of electrostatic, depletion, structural and hydrodynamic forces. The hydrodynamic component of the force could be isolated by comparing the force profiles measured upon approach and retraction. It was found that when the hydrodynamic component was subtracted from the total force, the resulting force profiles measured at scan speeds of 80, 800, 2400, 4800 and 11,200 nm/s all overlaid, indicating that the surface forces (electrostatic, depletion and structural) were not affected by the scan speed. This result was further supported by an approximation of the rates of viscous and diffusive motion in the gap region. In addition, the variation of the hydrodynamic force with particle/plate separation distance agreed relatively well with a prediction made using the mobility correction factor developed for simple fluids, suggesting that the nanoparaticles do not alter the flow in the lubrication layer at these concentrations.