Effect of Nb addition on the structure and mechanical behaviors of CoCrCuFeNi high-entropy alloy coatings

The microstructure and mechanical properties of the CoCrCuFeNiNb high-entropy alloy coating prepared by plasma transferred arc cladding process were investigated. Two phases are found in the prepared coating with Nb: one is face-centered-cubic solid solution phase; the other is the Laves phase of (CoCr) Nb type. The nano-indentation testing indicates that the microhardness (H), elastic modulus (E), the hardness/modulus of elasticity ratio (H/E ratio) and high resistance to plastic deformation (H3/E2) of the coating with Nb are 6.13 GPa, 221 GPa, 0.028 and 4.7 × 10− 3 respectively. The CoCrCuFeNiNb coating displays excellent wear and corrosion resistance. The wear resistance of the coating with Nb is about 1.5 times higher than that of the coating without Nb under the same wet sand rubber wheel abrasion testing conditions. Compared with the coating without Nb and as-cast 304 stainless steel, the coating with Nb shows the lowest icorr values in polarization curves and the highest fitted Rf values in EIS plots in 6N hydrochloric acid solution.