Effect of strain rate on high-temperature low-cycle fatigue of 17-4 PH stainless steels

The effect of strain rate (10−2, 10−3 and 10−4 s−1) on the low-cycle fatigue (LCF) behavior was investigated for 17-4 PH stainless steels in three different conditions at temperatures of 300–500 °C. The cyclic stress response (CSR) for Condition A tested at 300 and 400 °C showed cyclic hardening due to an influence of dynamic strain aging (DSA). An in situ precipitation-hardening effect was found to be partially responsible for the cyclic hardening in Condition A at 400 °C. For H900 and H1150 conditions tested at 300 and 400 °C, the CSR exhibited a stable stress level before a fast drop in load indicating no cyclic hardening or softening. At 500 °C, cyclic softening was observed for all given material conditions because of a thermal dislocation recovery mechanism. The cyclic softening behavior in Conditions A and H900 tested at 500 °C is attributed partially to coarsening of the Cu-rich precipitates. The LCF life for each material condition, tested at a given temperature, decreased with decreasing strain rate as a result of an enhanced DSA effect. At all given testing conditions, transgranular cracking was the common fatigue fracture mode.