Microstructures and tensile behavior of carbon nanotube reinforced Cu matrix nanocomposites

Carbon nanotubes (CNTs) have been considered as an ideal reinforcement to improve the mechanical performance of monolithic materials. However, the CNT/metal nanocomposites have shown lower strength than expected. In this study, the CNT reinforced Cu matrix nanocomposites were fabricated by spark plasma sintering (SPS) of high energy ball-milled nano-sized Cu powders with multi-wall CNTs, and followed by cold rolling process. The microstructure of CNT/Cu nanocomposites consists of two regions including CNT/Cu composite region, where most CNTs are distributed, and CNT free Cu matrix region. The stress–strain curves of CNT/Cu nanocomposites show a two-step yielding behavior, which is caused from the microstructural characteristics consisting of two regions and the load transfer between these regions. The CNT/Cu nanocomposites show a tensile strength of 281 MPa, which is approximately 1.6 times higher than that of monolithic Cu. It is confirmed that the key issue to enhance the strength of CNT/metal nanocomposite is homogeneous distribution of CNTs.