The design of advanced performance high strength low-carbon martensitic armour steels: Microstructural considerations

Neither a higher hardness nor higher mechanical properties (yield strength, ultimate tensile strength, impact energy, and %elongation) appear to be exclusive or even reliable criteria for predicting the ballistic performance of martensitic armour steels, as shown in our previous work [K. Maweja, W.E. Stumpf, Mater. Sci. Eng. A (February), submitted for publication]. An alternative design methodology for tempered martensitic armour steels is, therefore, proposed which is based on the effect of retained austenite on the ratio of the yield to ultimate tensile strength (YS/UTS), the microstructure of the tempered martensite and its martensite start temperature Ms. This approach was developed using 6 mm thick armour plates and later was successfully applied to the design of eight experimental armour steels with plate thicknesses ranging from 4.7 to 5.2 mm and tested by the standard R4 (5.56 mm rounds) ballistic test.