Infrared microspectroscopy combined with conventional atomic force microscopy

This paper reports nanotopography and mid infrared (IR) microspectroscopic imaging coupled within the same atomic force microscope (AFM). The reported advances are enabled by using a bimaterial microcantilever, conventionally used for standard AFM imaging, as a detector of monochromatic IR light. IR light intensity is recorded as thermomechanical bending of the cantilever measured upon illumination with intensity-modulated, narrowband radiation. The cantilever bending is then correlated with the sampleʹs IR absorption. Spatial resolution was characterized by imaging a USAF 1951 optical resolution target made of SU-8 photoresist. The spatial resolution of the AFM topography measurement was a few nanometers as expected, while the spatial resolution of the IR measurement was 24.4 μm using relatively coarse spectral resolution (25–125 cm-1). In addition to well-controlled samples demonstrating the spatial and spectral properties of the setup, we used the method to map engineered skin and three-dimensional cell culture samples. This research combines modest IR imaging capabilities with the exceptional topographical imaging of conventional AFM to provide advantages of both in a facile manner.