Measurements of the dynamic lift force acting on a circular cylinder in cross-flow and exposed to acoustic resonance

A piezoelectric transducer is developed to perform direct measurements of the dynamic lift force acting on a circular cylinder in cross-flow, in the presence and absence of acoustic resonance. Details of the force transducer design are presented in the paper. The dynamic lift force is measured for a single cylinder with two different diameters, D=12.7 and 15.8 mm. During the tests, the first transverse acoustic mode of the duct housing the cylinder is self-excited. The fluctuating pressure on the top wall of the duct is measured simultaneously with the dynamic lift force. In the absence of acoustic resonance, the measured dynamic lift coefficients agree favorably with those reported in the literature. However, when the acoustic resonance is initiated, the dynamic lift experiences a drastic increase in amplitude associated with abrupt changes in the phase between the lift force and the acoustic pressure. A methodology to extract the hydrodynamic lift component from the total lift measured during acoustic resonance is also proposed. The hydrodynamic lift force is then decomposed into in-phase and out-of-phase components, with respect to the resonant sound pressure. This decomposition procedure provides new insights into the nature of the aeroacoustic sources in the cylinder wake. The proposed methodology, together with the test results provide a general design approach to assess the increase in the dynamic fluid loading on bluff bodies in cross-flow due to the excitation of acoustic resonance.