Draftability of a 8.95 kW walking tractor on tilled land

A 8.95-kW walking tractor was evaluated for draft and drawbar power on tilled land. Empirical equations were developed to correlate the relationship between draft and wheel slip, drawbar power and wheel slip and drawbar power and fuel consumption. The values of draft, drawbar power and specific fuel consumption were calculated at 25% wheel slip. The results indicated that the values of draft on tilled land with pneumatic wheels at engine speed of 2000 rpm were 803 and 773 N in second low and third low gears, respectively. The respective draft values at engine speed of 1500 rpm were 748 and 735 N in second low and third low gears under slightly loose soil conditions. Mounting of a 40-kg wheel ballast increased the value of draft to 901 and 921 N at an engine speed of 2000 rpm and 872 and 888 N at an engine speed of 1500 rpm in second low and third low gears. Replacement of pneumatic wheels by steel wheels further increased the draft readings to 1034 and 999 N at an engine speed of 2000 rpm and 913 and 935 N at engine speed of 1500 rpm in second low and third low gears, respectively, indicating significant increase in drawbar power both at 2000 and 1500 rpm in second low and third low gears with the use of steel wheels. The specific fuel consumption decreased by about 28% and 27% at engine speed of 2000 rpm and about 17% and 21% at engine speed of 1500 rpm in second low and third low gear with the use of steel wheels over pneumatic wheels without wheel ballast. The specific fuel consumption decreased by about 4% and 14% at engine speed of 2000 rpm and 7% and 23% at engine speed of 1500 rpm in second low and third low gears, respectively, with the use of steel wheels over pneumatic wheels with 40 kg wheel ballast.