Design of a high power millimeter wave launcher for EC H&CD system on ITER

An optimization procedure of the quasi-optical system for a millimeter wave launcher is developed for the ITER electron cyclotron heating and current drive (EC H&CD) launcher. In the launcher, the radiated RF beams from eight corrugated waveguides are reflected sequentially by two mirrors and injected into a plasma through a small aperture in the blanket shield module on the top of the launcher. Using a steepest decent method, the heat load on the mirrors is successfully reduced to the acceptable level by flattening the RF power profile on the mirrors keeping the scattering of the RF power to a minimum from the mirrors. It is found that 20 MW injection will be acceptable even when the resistivity of 2.64 × 10−8 Ωm for the surface of the mirror (dispersion strengthened copper, 151 °C assumed) is increased by a factor of ∼10 with a contamination.