Title of article
Effect of heat treatment and addition of 4‑META to silane on microtensile bond strength of IPS e.max CAD ceramic to resin cement
Author/Authors
Soleimani, Laleh Department of Esthetic and Restorative Dentistry - Health Research Institute - Babol University of Medical Sciences, Babol , Alaghemand, Homayoon Department of Esthetic and Restorative Dentistry - Institute of Health - Babol University of Medical Sciences, Babol , Fatemi, Mostafa Department of Dental Biomaterials - School of Dentistry - Shahid Beheshti University of Medical Sciences, Tehran , Esmaeili, Behnaz Department of Esthetic and Restorative Dentistry - Institute of Health - Babol University of Medical Sciences, Babol
Pages
9
From page
318
To page
326
Abstract
Background: Silane promotes bonding between ceramic and resin cement. Silane function could be
improved by heat treatment and adding 4-Methacryloxyethyl trimellitate anhydride (4-META). The
aim of this study was to assess the effect of heat treatment and adding 4‑META to silanes on the
microtensile bond strength of IPS e.max CAD ceramic and resin cement.
Materials and Methods: In this in vitro study, 32 IPS e.max CAD blocks (6 mm × 6 mm × 4 mm)
were randomly divided into 8 groups of 4. The ceramic surfaces were etched by 10% hydrofluoric (HF)
for 20 s, and Clearfil Ceramic Primer Plus, Clearfil Porcelain Bond Activator (CPA) +4‑META,
CPA + Clearfil SE Bond (CPA + SE), and Bis‑Silane with and without Oven drying at 100°C for 5 min
were applied on the ceramic surfaces as silanes, and then, the ceramics were bonded to composite
disks by dual‑cured resin cements. Ultimately, a total of 120 sticks ( 1 mm × 1 mm × 8 mm) were
subjected to microtensile bond strength test (15 sticks from each group) and the failure types
were assessed by stereomicroscope at 40x. Data were analyzed by two‑sided analysis of variance
test and Student’s t‑test the P values were considered to be < 0.05.
Results: The Bis Silane group (two bottles) showed maximum bond strength (P = 0.009). Heat
treatment significantly reduced the bond strength in Bis Silane (P = 0.0001); but, in other groups, it
did not show significant effect on the bond strength. Adding 4‑META to CPA did not significantly
affect the microtensile bond strength of IPS e.max CAD ceramic to resin cement, and there was
no difference in mode of failure between groups.
Conclusion: The effect of silane type was significant on the microtensile bond strength of the
ceramic to resin cement. The effect of 4‑META on the bond strength was not significant. The
interaction between silane type and heat treatment on the bond strength of ceramic to resin
cement was also significant.
Keywords
IPS e.max CAD , resin cement , silane
Journal title
Astroparticle Physics
Serial Year
2019
Record number
2470612
Link To Document