Title of article
Physico-chemical characteristics of chemically activated cement containing boron
Author/Authors
A. Olgun، نويسنده , , T. Kavas، نويسنده , , Y. Erdogan، نويسنده , , G. Once، نويسنده ,
Issue Information
روزنامه با شماره پیاپی سال 2007
Pages
12
From page
2384
To page
2395
Abstract
The use of colemanite ore waste (CW) containing boron as a cement replacement material increases the long-term strength of the concrete. Despite this benefit, the use of CW is limited due to the low-early strength of the CW concrete. The study reported below intended to eliminate this problem. The experimental part comprises two stages: in the first stage the possibility of using CW instead of natural gypsum has been investigated through several tests. In the second stage, a number of chemical activators, namely, sulphonated melamine formaldehyde (SMF) condensates, sulphonated naphthalene formaldehyde (SNF) condensates, Na2SO4, and calcium chloride were used. The results showed that replacement of natural gypsum by CW results in an acceptable initial and final setting time of cement and increases the compressive strength of the mortar at long term. The addition of chemical activators into the system accelerated pozzolanic reaction and considerably increased early strength of the mortars. The results also indicate that chemical activators not only alter the rate of cement paste hydration, but the microstructure of mortar as well.
Keywords
activators , Microstructure , retardation , Colemanite ore waste , Strength
Journal title
Building and Environment
Serial Year
2007
Journal title
Building and Environment
Record number
409501
Link To Document