Title of article
Compressive response and failure of balsa wood
Author/Authors
re Da Silva، نويسنده , , Stelios Kyriakides، نويسنده ,
Issue Information
روزنامه با شماره پیاپی سال 2007
Pages
33
From page
8685
To page
8717
Abstract
Balsa wood is a natural cellular material with excellent stiffness-to-weight and strength-to-weight ratios as well as superior
energy absorption characteristics. These properties are derived from the microstructure, which consists of long slender
cells (tracheids) with approximately hexagonal crosssections that are arranged axially. Parenchyma are a second type of
cells that are radially arranged in groups that periodically penetrate the tracheids (rays). Under compression in the axial
direction the material exhibits a linearly elastic regime that terminates by the initiation of failure in the form of localized
kinking. Subsequently, under displacement-controlled compression, a stress plateau is traced associated with the gradual
spreading of crushing of the cells through the material. The material is less stiff and weaker in the tangential and radial
directions. Compression in these directions crushes the tracheids laterally but results in a monotonically increasing
response typical of lateral crushing of elastic honeycombs. The elastic and inelastic properties in the three directions have
been established experimentally as a function of the wood density. The microstructure and its deformation modes under
compression have been characterized using scanning electron microscopy. In the axial direction it was observed that in the
majority of the tests, failure initiated by kinking in the axial–tangential plane. The local misalignment of tracheids in zones
penetrated by rays ranged from 4 to 10 and axial compression results in shear in these zones. Measurement of the shear
response and the shear strength in the planes of interest enabled estimation of the kinking stress using the Argon–Budiansky
kinking model. The material strength predicted in this manner has been found to provide a bounding estimate of the
axial strength for a broad range of wood densities. The energy absorption characteristics of the wood have also been measured
and the specific energy absorption was found to be comparable to that of metallic honeycombs of the same relative
density.
Keywords
Compression , Balsa wood , Kinking failure
Journal title
International Journal of Solids and Structures
Serial Year
2007
Journal title
International Journal of Solids and Structures
Record number
449261
Link To Document