Experimental Study of Flow in a Vortex Drop Shaft

Model experiments were conducted to investigate the performance of a vortex drop structure with a relatively small height to diameter ratio. Detailed measurements of wall pressure and water thickness of annular jet flow were obtained along the vertical drop shaft, and the rate of air entrainment was measured. The results confirmed the high efficiency of energy dissipation in the vortex drop structure even for a relatively small drop height. The air entrainment rate was found to be significant, and good correlation was observed between the rate of air entrainment and the water jet velocity. The one-dimensional frictional freevortex flow model was extended to include the effects of pressure forces. While the energy loss in the drop shaft can be simulated by correcting the friction factor, both the frictional model and the extended model significantly underpredict the wall pressure.