Determination of Wastewater LC50 of the Different Process Stages of the Textile Industry

Textile plants are very important sources of toxic discharges. The purpose of the research described in this paper was to use bioassays with daphnids to determine the LC50 values of textile wastewater samples taken from different stages of the finishing textile industry. Toxicity due to dyeing, chlorination, and the absence of adequate physicochemical conditions for daphnid survival were considered. Wastewater samples corresponding to each process stage were collected at five finishing textile industries and assayed according to previously published procedures. The sensitivity of daphnids to chemicals was assayed using sodium dodecyl sulfate and was similar to other reports (14.6±6.8 vs 14.5±2.3 mg/L). All effluents from the five company samples were toxic in terms of LC50 and exhibited very high toxicity with acute toxicity unit (ATU) levels between 2.2 and 960, indicating that the five textile industries produced toxic water. The sensory characteristics indicated that the dyes contributed to overall sample toxicity at all process stages. The most toxic contaminant seemed to be ClO− at levels between 0.2 and 6.8 mg/L, suggesting that further research is needed on the economic costs of stage-by-stage and total effluent treatments.