The use of the pulse height analyser ultrafine condensation particle counter (PHA-UCPC) technique applied to sizing of nucleation mode particles of differing chemical composition

A modified white-light pulse-height analyser (PHA) TSI 3025 ultra-fine condensation particle counter (UCPC) is often used to provide fast response of aerosol size distributions between 3 and 10 nm since there is a monotonic link between initial aerosol size and nucleated droplet final size. The use of the PHA-UCPC for sizing nucleation mode particles depends on the droplet nucleation in the condenser chamber being somewhat independent of particle composition. Laboratory characterization of the PHA-UCPC for a range of chemical compositions, thought to be involved in atmospheric aerosol nucleation and growth, are presented here. Ammonium sulphate, pinic acid, cis-pinonic acid, malonic acid and an iodine oxide were studied and their PHA-UCPC calibration kernels are presented. It was found that all species possessed significantly different PHA responses. The results suggest that, unless the nano-particle chemical composition is known, then the PHA-UCPC cannot be used for measurements of aerosol size distributions. However, the PHA-UCPC, if used in parallel with mobility size distribution measurements, can help elucidate nano-particle chemical composition. Using the combination of mobility size distributions and the PHA-UCPC response during a nucleation and growth event over the boreal forest indicates that new particle formation, in this region, is driven by condensation of organic vapours.