Performance analysis of non-isothermal solar reactors for methanol decomposition

A procedure for analyzing the performance of non-isothermal solar reactors for methanol decomposition was developed, based on a model of thermal loss from direct steam generation collector and a comprehensive kinetic model of methanol decomposition employing BASF K3-110 catalyst. It was found that catalytic bed temperature tends towards a certain value, which depends on the chemical reaction type, radiation intensity and collector structure mainly. For a beam incidence angle of 0 , system efficiency increases from 56% at a radiation intensity of 400 W m 2 to almost 58% at a radiation intensity of 1000 W m 2. For a radiation intensity of 400W m 2, beam incidence angle of 20 , absorber length of 10 m, feed temperature of 373 K and ratio of reaction section of 0.9, the mole flow rate of feed in the range of 0.21–0.23 mol s 1 results in a maximum quantity of reacted methanol of 0.146 mol s 1, while a mole flow rate of feed of 0.15 mol s 1 leads to a maximum system efficiency of 54.2%. The research indicates that the pre-heating section should be as short as possible for effective use of solar energy. 2006 Elsevier Ltd. All rights reserved