Test of an induction motor with HTS wire at end ring and bars

Motors with HTS wires or bulks have been developed recently. These are a large synchronous motor with HTS wires at the field winding in the rotor, hysteresis and reluctance motors with HTS bulk in the rotor. This paper presents the fabrication and test results of an HTS induction motor. Conventional end rings and short bars were replaced with HTS wires in the motor. Stator of the conventional induction motor was used as the stator of the HTS motor. Rated capacity and rpm at full rotor of the conventional motor were 0.75 kW and 1710 rpm. Two HTS wires are used in parallel to make the end rings and bars. The critical current of the BSCCO-2223 HTS wire which was used in the bars and end rings were 115 A. An electrodynamometer was coupled directly to the shaft of the rotor with HTS wires.