Characterization of an Integrable Single-Crystalline 3-D Tactile Sensor

Porous-Si-micromachining technique was used for the formation of single-crystalline force-sensor elements, capable of resolving the three vector components of the loading force. Similar structures presented so far are created from deposited polycrystalline Si resistors embedded in multilayered SiO₂/Si₃N₄ membranes, using surface micromachining technique for a cavity formation. In this paper, the authors implanted four piezoresistors in an n-type-perforated membrane, having their reference pairs on the substrate in order to form four half bridges for the transduction of the mechanical stress. They successfully combined the HF-based porous-Si process with conventional doping and Al metallization, thereby offering the possibility of integration with readout and amplifying electronics. The 300times300 mum² membrane size allows for the formation of large tactile arrays using single-crystalline-sensing elements of superior mechanical properties. They used the finite-element method for modeling the stress distribution in the sensor, and verified the results with real measurements. Finally, they covered the sensors with different elastic silicon-rubber layers, and measured the sensor´s altered properties. They used continuum mechanics to describe the behavior of the rubber layer