DocumentCode
1133143
Title
Concatenated Sequences for Spread Spectrum Systems
Author
Maskara, S.L. ; Das, J.
Author_Institution
Indian Institute of Technology
Issue
3
fYear
1981
fDate
5/1/1981 12:00:00 AM
Firstpage
342
Lastpage
350
Abstract
Concatenated sequences are suggested and developed for use in spread spectrum (SS) systems. Special receiver realization is discussed and it is shown that the concatenated sequences offer great advantage in reducing the size of the matched filter correlators (MFC) in the SS receiver. Experimental systems have been built using concatenated sequences and their performance is reported here. It has been shown that a processing gain of 60 is obtainable with a 15 Ã 4 concatenated sequence which requires three tapped delay lines (TDL), two of length 15 and one of 4. Thus a total of only 34 delay units (with a nonlinear interface network, only 19 delay units) are required. Teleprinter signals can be transmitted over telephone channels using a bandwidth (BW) expansion of 60 with an input signal-to-noise ratio (SNR) of only -5.1 dB, resulting in a character- error-rate of 1 in 103. Techniques have been developed to reduce the sidelobe levels in the aperiodic autocorrelation functions (ACF) of the pseudonoise (PN) codes. For 15 length and 7 length PN sequences, sidelobes are reduced by 9 dB and 9.4 dB, respectively, using transversal filters. Application of the SS systems to the problem of multiaccessing and antijamming are discussed.
Keywords
Autocorrelation; Bandwidth; Concatenated codes; Correlators; Delay lines; Matched filters; Signal to noise ratio; Spread spectrum communication; Telephony; Teleprinting;
fLanguage
English
Journal_Title
Aerospace and Electronic Systems, IEEE Transactions on
Publisher
ieee
ISSN
0018-9251
Type
jour
DOI
10.1109/TAES.1981.309061
Filename
4102503
Link To Document