Development of 36-Megawatt Modulators for the Astron 1000-Megawatt Electron Accelerator

A 1000-megawatt peak-power linear electron accelerator is required for the injection of electrons into a thermonuclear fusion experimental device, called the Astron, which is now under construction at the Lawrence Radiation Laboratory in Livermore, California. The Astron will determine the feasibility of an actual power-producing fusion reactor utilizing the principles of confinement and heating of a plasma by establishing a long rotating layer of relativistic electrons. The linear electron accelerator under construction is designed to produce a pulsed electron beam with an energy of 5 Mev ±0.5%, a pulse current of 200 amperes, with a pulse duration of 0.25 ¿sec and at 60 pulses per second. The accelerator will be of the induction type utilizing large magnetic cores. Approximately 400 cores will be used and each one will contribute a minimum acceleration of 12,000 volts. The details of the design and development of a line-type modulator used for pulsing cores and capable of an output peak power of 36 megawatts will be discussed in detail. A type 6587 and type 5949A thyratron were life-tested at 32 kv, 2000 amperes, and 60 pps. Useful life in excess of 1000 hours was obtained. In addition, it was necessary to develop corona-resistant connectors for this application. Life data and final design for a small connector suitable for operation at 16-kv, 0.4-¿sec (70% amplitude points) pulses with 60-nanosecond rise time, and at 60 pps are presented.