DocumentCode
1381959
Title
Surface micromachined capacitive ultrasonic transducers
Author
Ladabaum, Igal ; Jin, Xuecheng ; Soh, Hyongsok T. ; Atalar, Abdullah ; Khuri-Yakub, Butrus T.
Author_Institution
Edward L. Ginzton Lab., Stanford Univ., CA, USA
Volume
45
Issue
3
fYear
1998
fDate
5/1/1998 12:00:00 AM
Firstpage
678
Lastpage
690
Abstract
The current state of novel technology, surface microfabricated ultrasonic transducers, is reported. Experiments demonstrating both air and water transmission are presented. Air-coupled longitudinal wave transmission through aluminum is demonstrated, implying a 110 dB dynamic range for transducers at 2.3 MHz in air. Water transmission experiments from 1 to 20 MHz are performed, with a measured 60 dB SNR at 3 MHz. A theoretical model is proposed that agrees well with observed transducer behavior. Most significantly, the model is used to demonstrate that microfabricated ultrasonic transducers constitute an attractive alternative to piezoelectric transducers in many applications.
Keywords
micromachining; ultrasonic transducers; underwater sound; 1 to 20 MHz; 2.3 MHz; SNR; air-coupled longitudinal wave transmission; capacitive ultrasonic transducers; surface micromachined devices; transducer behavior; water transmission experiments; Acoustic signal detection; Acoustic transducers; Biomedical transducers; Dynamic range; Impedance; Laser excitation; Piezoelectric transducers; Solids; Ultrasonic imaging; Ultrasonic transducers;
fLanguage
English
Journal_Title
Ultrasonics, Ferroelectrics, and Frequency Control, IEEE Transactions on
Publisher
ieee
ISSN
0885-3010
Type
jour
DOI
10.1109/58.677612
Filename
677612
Link To Document