DocumentCode
1428256
Title
Design and performance of active power filters
Author
Thomas, Thierry ; Haddad, Kevork ; Joos, Geza ; Jaafari, Alain
Author_Institution
MTE Corp., Mnomonee Falls, WI, USA
Volume
4
Issue
5
fYear
1998
Firstpage
38
Lastpage
46
Abstract
This article has demonstrated the feasibility of a three phase active filter based on a half-bridge topology. Design guidelines for the power circuit have been derived and applied to a 5 kVA IGBT laboratory prototype. In the single phase mode, the active filter can reduce the low frequency harmonic content in the AC line to below 1% excluding the harmonics due to switching action of the converter. In the three phase mode, line currents are corrected under balanced and unbalanced conditions. The neutral current is reduced significantly.
Keywords
active filters; bridge circuits; compensation; insulated gate bipolar transistors; power filters; power system harmonics; 5 kVA; AC line; IGBT laboratory prototype; active power filters; balanced conditions; half-bridge topology; line currents correction; low frequency harmonic content reduction; neutral current; power circuit; single phase mode; three phase active filter; three phase mode; unbalanced conditions; Active filters; Capacitors; Power harmonic filters; Power quality; Power system harmonics; Proposals; Pulse width modulation; Topology; Voltage; Wire;
fLanguage
English
Journal_Title
Industry Applications Magazine, IEEE
Publisher
ieee
ISSN
1077-2618
Type
jour
DOI
10.1109/2943.715505
Filename
715505
Link To Document