• DocumentCode
    1469794
  • Title

    A New Statistics-Based Online Baseline Restorer for a High Count-Rate Fully Digital System

  • Author

    Li, Hongdi ; Wang, Chao ; Baghaei, Hossain ; Zhang, Yuxuan ; Ramirez, Rocio ; Liu, Shitao ; An, Shaohui ; Wong, Wai-Hoi

  • Author_Institution
    Dept. of Exp. Diagnostic Imaging, Univ. of Texas, Houston, TX, USA
  • Volume
    57
  • Issue
    2
  • fYear
    2010
  • fDate
    4/1/2010 12:00:00 AM
  • Firstpage
    550
  • Lastpage
    555
  • Abstract
    The goal of this work is to develop a novel, accurate, real-time digital baseline restorer using online statistical processing for a high count-rate digital system such as positron emission tomography (PET). In high count-rate nuclear instrumentation applications, analog signals are DC-coupled for better performance. However, the detectors, pre-amplifiers and other front-end electronics would cause a signal baseline drift in a DC-coupling system, which will degrade the performance of energy resolution and positioning accuracy. Event pileups normally exist in a high-count rate system and the baseline drift will create errors in the event pileup-correction. Hence, a baseline restorer (BLR) is required in a high count-rate system to remove the DC drift ahead of the pileup correction. Many methods have been reported for BLR from classic analog methods to digital filter solutions. However a single channel BLR with analog method can only work under 500 kcps count-rate, and normally an analog front-end application-specific integrated circuits (ASIC) is required for the application involved hundreds BLR such as a PET camera. We have developed a simple statistics-based online baseline restorer (SOBLR) for a high count-rate fully digital system. In this method, we acquire additional samples, excluding the real gamma pulses, from the existing free-running ADC in the digital system, and perform online statistical processing to generate a baseline value. This baseline value will be subtracted from the digitized waveform to retrieve its original pulse with zero-baseline drift. This method can self-track the baseline without a micro-controller involved. The circuit consists of two digital counter/timers, one comparator, one register and one subtraction unit. Simulation shows a single channel works at 30 Mcps count-rate with pileup condition. 336 baseline restorer circuits have been implemented into 12 field-programmable-gate-arrays (FPGA) for our new fully digital PET system.
  • Keywords
    digital filters; field programmable analogue arrays; high energy physics instrumentation computing; position sensitive particle detectors; positron emission tomography; DC-coupling system; PET camera; analog front-end application-specific integrated circuits; analog signals; digital filter solution; digitized waveform; energy resolution; field-programmable-gate-arrays; high count-rate fully digital system; high count-rate nuclear instrumentation applications; positioning accuracy; positron emission tomography; signal baseline drift; statistical processing; statistics-based online baseline restorer; Application specific integrated circuits; Degradation; Detectors; Digital systems; Energy resolution; Instruments; Nuclear electronics; Positron emission tomography; Real time systems; Signal restoration; Auto-calibration; FPGA; baseline restoration; positron emission tomography (PET);
  • fLanguage
    English
  • Journal_Title
    Nuclear Science, IEEE Transactions on
  • Publisher
    ieee
  • ISSN
    0018-9499
  • Type

    jour

  • DOI
    10.1109/TNS.2009.2036914
  • Filename
    5446500