A 2×4 substrate-integrated waveguide probe-fed cavity-backed patch array

Author

Awida, Mohamed H. ; Elkhouly, Essam ; Fathy, Aly E.

Author_Institution

EECS Dept., Univ. of Tennessee at Knoxville, Knoxville, TN, USA

fYear

2010

fDate

11-17 July 2010

Firstpage

1

Lastpage

4

Abstract

A 2×4 Ku-band cavity-backed microstrip patch antenna array has been implemented using the substrate integrated waveguide technology (SIW) -a low cost multi-layer PCB process. Cavities are emulated using vias and the patches are probe fed using a microstrip feed network. The microstrip feed network is placed in the back of the antennas to reduce the mutual coupling between the feed network and the patches. Therefore, a superior antenna performance was obtained in terms of the realized gain and the radiation pattern. The array was fabricated and its measured results agreed well with our theoretical predictions and indicated high efficiency and wide bandwidth of greater than %74 and 6% respectively.

Keywords

microstrip antenna arrays; printed circuits; substrate integrated waveguides; Ku-band cavity-backed microstrip patch antenna array; microstrip feed network; multi-layer PCB process; substrate-integrated waveguide probe-fed cavity-backed patch array; Arrays; Cavity resonators; Feeds; Microstrip; Microstrip antenna arrays; Microstrip antennas; Substrates;

fLanguage

English

Publisher

ieee

Conference_Titel

Antennas and Propagation Society International Symposium (APSURSI), 2010 IEEE

Conference_Location

Toronto, ON

ISSN

1522-3965

Print_ISBN

978-1-4244-4967-5

Type

conf

DOI

10.1109/APS.2010.5561402

Filename

5561402