P1K-3 Contactless Torque and Temperature Sensor Based on SAW Resonators

Author

Kalinin, Victor ; Bown, George ; Leigh, Arthur

Author_Institution

Transense Technol. plc., Bicester

fYear

2006

fDate

2-6 Oct. 2006

Firstpage

1490

Lastpage

1493

Abstract

A wireless passive SAW sensor based on three one-port resonators and capable of simultaneous torque and temperature measurement is presented. The sensing element is made on Y+34deg cut quartz substrate and the resonant frequencies are in the range from 433 to 437 MHz. Interrogation of the sensor is performed through an RF rotary coupler by short RF pulses. A microprocessor in the interrogation unit analyses the spectrum of SAW responses and calculates a temperature compensated torque value. Experimental results show that the temperature measurement error is within plusmn1deg at any angle of the shaft and the torque measurement error does not exceed plusmn1% of full scale within the range from -40deg to +125degC

Keywords

silicon compounds; surface acoustic wave resonators; surface acoustic wave sensors; temperature measurement; temperature sensors; torque measurement; yttrium; 433 to 437 MHz; RF pulses; RF rotary coupler; SAW resonators; SAW response spectrum; Y-SiO₂; contactless temperature sensor; contactless torque sensor; interrogation unit microprocessor; one port resonators; resonant frequencies; sensing element; temperature measurement; torque measurement; wireless passive SAW sensor; yttrium-quartz substrate; Frequency measurement; Radio frequency; Resonant frequency; Sensor systems; Shafts; Surface acoustic waves; Temperature measurement; Temperature sensors; Torque measurement; Wireless sensor networks;

fLanguage

English

Publisher

ieee

Conference_Titel

Ultrasonics Symposium, 2006. IEEE

Conference_Location

Vancouver, BC

ISSN

1051-0117

Print_ISBN

1-4244-0201-8

Electronic_ISBN

1051-0117

Type

conf

DOI

10.1109/ULTSYM.2006.374

Filename

4152230