DocumentCode
2502735
Title
Force control strategy and test research of underwater dexterous hand
Author
Wang, Hua ; Huang, Xiaodiao ; Hong, Rongjing ; Fang, Chenggang
Author_Institution
Nanjing Univ. of Technol., Nanjing
fYear
2008
fDate
25-27 June 2008
Firstpage
8829
Lastpage
8833
Abstract
The contract force between the fingertip and object need to be controlled when the underwater dexterous hand grasp the object. The original impedance control method lacks robustness because of the inaccurate dynamic model, position error and unknown stiffness of the object, thus, the position-based neural network impedance control method was studied. The effect of position error was analyzed, the neural network was adopted to compensate the uncertainty of finger dynamics, object position and stiffness one by one, and compensation strategy was deduced in detail. Compensator adopted forward feedback neural network with three layers, and updating rules was obtained based on BP arithmetic and Delta learning rule. Finally, the tests of single finger force control were carried out to verify the compensation effect in these three conditions. The results show that the position-based neural network impedance control is a robust method, and this method is fit to the control system of the underwater dexterous hand.
Keywords
backpropagation; compensation; dexterous manipulators; force control; manipulator dynamics; neurocontrollers; recurrent neural nets; uncertain systems; underwater vehicles; backpropagation arithmetic; compensation strategy; delta learning rule; finger dynamics; force control strategy; forward feedback neural network; object position; position error; position-based neural network impedance control method; uncertain system; underwater dexterous hand test research; Contracts; Control systems; Error analysis; Error correction; Fingers; Force control; Impedance; Neural networks; Robust control; Testing; Force Control; Impedance Control; Neural Network; Underwater Dexterous Hand;
fLanguage
English
Publisher
ieee
Conference_Titel
Intelligent Control and Automation, 2008. WCICA 2008. 7th World Congress on
Conference_Location
Chongqing
Print_ISBN
978-1-4244-2113-8
Electronic_ISBN
978-1-4244-2114-5
Type
conf
DOI
10.1109/WCICA.2008.4594410
Filename
4594410
Link To Document