Effect of electrode coating on leakage current and surface flashover strength in polymers

Author

Youssef, Fathi M H ; Eish, Taher D.

Author_Institution

Dept. of Electr. Eng., Mansoura Univ., Egypt

fYear

1988

fDate

1-3 Sep 1988

Firstpage

344

Lastpage

348

Abstract

The influence of electrode coating on the leakage current of three polymer insulating materials, namely, polystyrene, (PS), polyvinyl chloride (PVC), and polymethylmethacrylate (PMMA), is investigated. The insulating materials have been subjected to alternating voltage (50 Hz) under inhomogeneous field conditions (rod-plate electrode system). Experimental investigations of the effect of specimen thickness on leakage current and flashover voltage have been carried out under bare electrode conditions as well as under coated electrode conditions. The results illustrating the effect of electrode coating on leakage current and surface flashover voltage are presented and discussed

Keywords

flashover; leakage currents; organic insulating materials; polymers; PMMA; PVC; electrode coating; flashover voltage; inhomogeneous field conditions; insulating materials; leakage current; polymers; polymethylmethacrylate; polystyrene; polyvinyl chloride; specimen thickness; surface flashover strength; Coatings; Dielectric losses; Dielectrics and electrical insulation; Electrodes; Flashover; Leakage current; Mechanical factors; Plastic insulation; Polymer films; Voltage;

fLanguage

English

Publisher

ieee

Conference_Titel

Electrets, 1988. (ISE 6) Proceedings., 6th International Symposium on (IEEE Cat. No.88CH2593-2)

Conference_Location

Oxford

Type

conf

DOI

10.1109/ISE.1988.38577

Filename

38577