Novel flux modulated positive and negative sequence deadbeat current control of voltage source converters

Author

Xie, Hailian ; Ängquist, Lennart ; Nee, Hans-Peter

Author_Institution

Sch. of Electr. Eng., R. Inst. of Technol., Stockholm

fYear

0

fDate

0-0 0

Abstract

Voltage source converters are widely used in the power system to enhance the power system performance. In the conventional converter control, the control system usually takes the voltage measured at the point where the converter is connected and calculates the reference voltage for the converter; with a modulation system the converter then produces the required ´average voltage´. In this paper, a novel flux modulation scheme, combined with the deadbeat current control strategy, is proposed. The current controller is capable of controlling both positive and negative sequence currents. With flux modulation, the control system measures the bus flux and commands the converter to generate the required flux. The simulation and experimental results presented show a good performance of this converter control system

Keywords

electric current control; magnetic flux; magnetic variables measurement; power convertors; voltage measurement; average voltage; bus flux measurement; deadbeat current control; flux modulated negative sequence; flux modulated positive sequence; flux modulation scheme; reference voltage; voltage source converters; Control systems; Current control; Delay; Power conversion; Power system measurements; Pulse width modulation; Pulse width modulation converters; Switching converters; Torque control; Voltage control; VSC; converter control; deadbeat control; flux modulation; negative sequence current control; voltage source converter;

fLanguage

English

Publisher

ieee

Conference_Titel

Power Engineering Society General Meeting, 2006. IEEE

Conference_Location

Montreal, Que.

Print_ISBN

1-4244-0493-2

Type

conf

DOI

10.1109/PES.2006.1709230

Filename

1709230