The ITER pulsed power supply system

Author

Mondino, P.L.

Author_Institution

Naka Joint Work Site, ITER Joint Central Team, Ibaraki, Japan

Volume

1

fYear

1997

fDate

6-10 Oct 1997

Firstpage

491

Abstract

The ITER pulsed power supply system includes the superconducting coils power supplies and the heating and current drive power supplies. After a short introduction the paper reports the interruption of very high current (170 kA) for the central solenoid, which is a critical issue, and other aspects of the design not described previously: the high voltage power supply (1.0 MV) for the neutral beams and the pulse step modulators for the ion cyclotron power generators. Finally the paper presents the work done on local energy storage that could be required at a site with limited power capability

Keywords

fusion reactor design; fusion reactor ignition; high-voltage engineering; plasma beam injection heating; plasma radiofrequency heating; plasma toroidal confinement; power supplies to apparatus; pulsed power technology; superconducting coils; 1 MV; 170 kA; ITER pulsed power supply system; central solenoid; current drive power supplies; fusion reactor design; heating power supplies; high voltage power supply; ion cyclotron power generators; local energy storage; neutral beams; pulse step modulators; superconducting coils power supplies; very high current interruption; Current supplies; Cyclotrons; Heating; Optical modulation; Power generation; Pulse modulation; Pulsed power supplies; Solenoids; Superconducting coils; Voltage;

fLanguage

English

Publisher

ieee

Conference_Titel

Fusion Engineering, 1997. 17th IEEE/NPSS Symposium

Conference_Location

San Diego, CA

Print_ISBN

0-7803-4226-7

Type

conf

DOI

10.1109/FUSION.1997.687086

Filename

687086