Robotic approach to improve turbine surface finish

This paper describes the approach taken by Alstom and Hydro-Quebec (HQ) in the development of robotic polishing to improve turbine efficiency by reducing surface roughness. Modern, large hydraulic turbines are profiled by a 5-axis milling machine and are polished manually. By robotizing the polishing, it becomes possible to obtain a better surface finish at a reasonable cost, and to reduce hydrodynamic friction loss. HQ´s portable robot Scompi was used to perform the polishing. Recent developments made by the supplier of the abrasives have resulted in their increased durability and improved productivity. A technique was developed to select the polishing process parameters best suited to a given surface waviness and roughness. A polishing test was carried out on a full-scale Francis turbine blade. The surface finish was lowered from Ra=15μm to Ra=0.1μm and the waviness (scallop 0.2mm tall and 30mm wide) was grinded away at a rate of 5 hour/m².