DocumentCode
300979
Title
Extension of TFTR operations to higher toroidal field levels
Author
Woolley, Robert D.
Author_Institution
Plasma Phys. Lab., Princeton Univ., NJ, USA
Volume
1
fYear
1995
fDate
30 Sep-5 Oct 1995
Firstpage
449
Abstract
For the past year, TFTR has sometimes operated at extended toroidal field (TF) levels, The extension to 5.6 Tesla (79 kA) was crucial for TFTR´s November ´94 10.7 MW DT fusion power record. The extension to 6.0 Tesla (85 kA) was commissioned on 9 September 1995. There are several reasons that one could expect the TF coils to survive the higher stresses that develop at higher fields. They were designed to operate at 5.2 Tesla with a vertical field of 0.5 Tesla, whereas the actual vertical field needed for the plasma does not exceed 0.35 Tesla. Their design specification explicitly required they survive some pulses at 6.0 Tesla. TF coil mechanical analysis computer models available during coil design were crude, leading to conservative design. And design analyses also had to consider worst-case misoperations that TFTR´s real time Coil Protection Calculators (CPCs) now positively prevent from occurring. Engineering considerations are summarized
Keywords
Tokamak devices; coils; electromagnets; fusion reactor operation; plasma toroidal confinement; stress analysis; 6 T; 85 kA; DT fusion power; TF coils; TFTR operations; coil design; coil protection calculators; design specification; higher toroidal field levels; mechanical analysis computer models; vertical field; Coils; Failure analysis; Geometry; Laboratories; Physics; Plasma measurements; Plasma stability; Plasma temperature; Power supplies; Risk analysis;
fLanguage
English
Publisher
ieee
Conference_Titel
Fusion Engineering, 1995. SOFE '95. Seeking a New Energy Era., 16th IEEE/NPSS Symposium
Conference_Location
Champaign, IL
Print_ISBN
0-7803-2969-4
Type
conf
DOI
10.1109/FUSION.1995.534260
Filename
534260
Link To Document