Linear optics calibration at the MIT-Bates South Hall Ring

Author

Wang, E. ; Jacobs, K. ; Carter, A. ; Cheever, D. ; Mcallister, B. ; Sibley, C. ; Safranek, J.

Author_Institution

MIT-Bates Linear Accel. Center, Middleton, MA, USA

Volume

5

fYear

1999

fDate

1999

Firstpage

3101

Abstract

The MIT-Bates South Hall Ring has been successfully commissioned for internal target experiments. More than 150 mA of stored beam has been circulated through a 40 cm long 1.5 cm diameter internal target cell. The ring has also been tuned for the first experiment on an external target using a resonantly extracted high duty factor beam. Beam-based measurements of the ring optics by means of analyzing the beam orbit response matrix, and comparing the results with models, have produced much needed information to set up the ring optics. Efforts have been made to improve the measurement precision, and to put the entire process on-line for use during machine operation

Keywords

calibration; electron accelerators; electron optics; particle beam dynamics; storage rings; 150 mA; MIT-Bates South Hall Ring; beam orbit response matrix; beam-based measurements; internal target cell; internal target experiments; linear optics calibration; machine operation; measurement precision; resonantly extracted high duty factor beam; stored beam; Calibration; Jacobian matrices; Large Hadron Collider; Linear accelerators; Magnets; Optical computing; Optical coupling; Optical sensors; Servomechanisms; Vectors;

fLanguage

English

Publisher

ieee

Conference_Titel

Particle Accelerator Conference, 1999. Proceedings of the 1999

Conference_Location

New York, NY

Print_ISBN

0-7803-5573-3

Type

conf

DOI

10.1109/PAC.1999.792193

Filename

792193