• DocumentCode
    972148
  • Title

    Trends in Field Quality Along the Production of the LHC Dipoles andDifferences Among Manufacturers

  • Author

    Todesco, E. ; Bellesia, B. ; Hagen, P. ; Vollinger, C.

  • Author_Institution
    Accelerator Technol. Dept., CERN, Geneva
  • Volume
    16
  • Issue
    2
  • fYear
    2006
  • fDate
    6/1/2006 12:00:00 AM
  • Firstpage
    419
  • Lastpage
    424
  • Abstract
    More than two thirds of the dipoles of the Large Hadron Collider have been manufactured and their magnetic field has been measured at room temperature. In this paper we make a review of the trends that have been observed during the production. In some cases, the trends were traced back to displacements of conductors with respect to the nominal lay-out. The analysis allows detecting the most critical zones in the superconducting coil as far as field quality is concerned. The second part of the paper makes the point of the observed differences in field quality between the three manufacturers. The analysis allows evaluating which multipoles are more affected, what magnitudes of displacements are necessary to explain these differences (the manufacturers all producing the same baseline), and what could be the origin of such differences
  • Keywords
    accelerator magnets; ion accelerators; magnetic fields; proton accelerators; storage rings; superconducting coils; superconducting magnets; synchrotrons; 293 to 298 K; LHC dipoles; Large Hadron Collider; conductors; field quality; magnetic field; multipoles; room temperature; superconducting coil; Assembly; Conductors; Large Hadron Collider; Magnetic field measurement; Manufacturing; Production; Superconducting cables; Superconducting coils; Superconducting magnets; Temperature measurement; Field quality; LHC; superconductivity;
  • fLanguage
    English
  • Journal_Title
    Applied Superconductivity, IEEE Transactions on
  • Publisher
    ieee
  • ISSN
    1051-8223
  • Type

    jour

  • DOI
    10.1109/TASC.2005.864294
  • Filename
    1642877