پديد آورندگان :
Zakeri ، S. University of Isfahan - Faculty of Civil Engineering and Transportation - Department of Geomatics Engineering , Farzaneh ، S. University of Tehran - Faculty of Engineering - Department of Surveying and Geomatics Engineering
كليدواژه :
Cross , section mapping , Manual excavation , Conventional tunneling , Reflectorless total station , Concreting volume , lining
چكيده فارسي :
Owing to the technical and economic aspects of the project management, preestimating the volumes of excavating, shotcreting, and concreting operations have been of great importance for the underground construction industry, especially in metro and highway tunnels. In this respect, we offer a reliable method based on the trigonometric geometry for estimating the required parameters of the conventional tunnels that are manually excavated via explosions and roadheader machines. To this end, a geodetic network consisting of dense benchmarks are firstly realized outside the trench and throughout the excavated tunnel. The crosssections of the tunnel are then mapped in the coordinate frame attached to the reference lines after orienting the reflectorless total station with respect to the geodetic network points and the predesigned reference lines. Consequently, by comparing the resultant coordinates of each crosssection at the excavating, shotcreting, and concreting stages, one can arrive at accurate estimation of the corresponding thickness, areas and volumes during different phases of the tunnel construction. The performance of the proposed method has been evaluated as a function of the central angles between the consecutive points on the arc of tunnel crosssection via a simulated dataset from an assumed Dshape tunnel. The numerical results have indicated that in the case of the consecutive central angle of 25 deg the estimated thickness, area, and volume errors are about 0.0057 m, 0.199 m2, and 0.399 m3, which can be considered as a clear indication of the reliability and applicability of the presented method.
