مطالعه توزيع تنش برشي جداره در جريان يكنواخت كانال با استفاده از ابزار دقيق و شبيه سازي عددي

Investigation of Wall Shear Stress Distribution in Open Channel Uniform Flow using an Accurate Instrument and Numerical Simulation

With the aim of investigating the distribution of wall shear stress in an open channel with a rectangular cross section and a smooth bed, an accurate needle type probe has been developed and after verification, it has been used for shear stress measurement in various cases of open channel uniform flows. In this instrument, capacitive type pressure transducers with 0.1 Pascal accuracy and 100Hz sampling rate were used to measure pressure fluctuations. Measured bed shear stresses are compared with the result of available analytical models and CFD simulations using FLUENT code for instrument verification. Variations of the measured local bed shear stresses at channel centerline with respect to channel aspect ratios, mean bed shear stresses and the lateral distribution of local bed shear stresses compare favorably with the previous experimental and analytical results and with the results of the present numerical simulations. Experimental measurements and numerical simulations show that the secondary currents affect the distribution of side wall shear stress more than the bed shear stress. Because of the presence of the alternate low-high velocity zones at the near bed region, the lateral distribution of the bed shear stress exhibits an oscillatory pattern.