A study of fused silica micro/nano patterning by focused-ion-beam

A dual-beam scanning electron microscopy (SEM)/focused-ion-beam (FIB) system was used to pattern fused silica substrates coated with a 15 nm thin Cr layer. The dimensions of fabricated features together with their surface morphology and profiles were investigated by SEM and atomic force microscopy (AFM). The study demonstrated that with the increase of the ion beam fluence the sputtering rate of the fused silica decreased non-linearly. Also, it was found that initially the sputtering rate increased with the increase of the beam current, after reaching a maximum value, it started decreasing when further beam current increment was performed. Compared with unprocessed areas, the surface finish of the features fabricated by FIB exhibited a significant improvement, and the ion fluence influence on the surface roughness of trenches with low aspect ratios could be considered as negligible. Using a fine beam probe, nano-gratings in the form of grooves with a width down to 54 nm and an aspect ratio higher than three were fabricated. The study showed that FIB machining could be an alternative technology to e-beam lithography for producing fused silica templates for UV nanoimprinting