The effects of injection timing on NOx emissions of a low heat rejection indirect diesel injection engine

Higher NOx is one of the major problems to be overcomed in a low heat rejection (LHR) diesel engine as insulation leads to an increase in combustion temperature about 200–250 °C compared to an identical standard (STD) diesel engine. High combustion temperatures alter optimum injection timing of a LHR engine. With the proper adjustment of the injection timing, it is possible to partially offset the adverse effect of insulation on heat release rate and hence to obtain improved performance and lower NOx. However, the injection timing and brake specific fuel consumption (BSFC) trade-off must be considered together in performance and NOx emission point of view. In this study, optimum injection timing was found with 4 crank angle (34° CA) retarded before top dead centre (BTDC) in LHR diesel engine in comparison to that of STD diesel engine (38° CA BTDC). When the LHR engine was operated with the injection timing of the 38 crank angle, which is the optimum value of the STD engine, it was shown that NOx emission increased about 15%. However, when the injection timing was retarded to 34° CA in the LHR case, it was observed a decrease on the NOx emissions with about 40% and the brake specific fuel consumption (BSFC) with about 6% compared to that of the STD case. Thus, by retarding the injection timing, an additional 1.5% saving in fuel consumption was obtained.